enLight® enSense™ Ozone Sensor

The new series of enLight® enSense™ sensors have been designed to work in harmony with the enLight platform and use the network created by the upgraded lighting infrastructure to carry the data from where it is being recorded to where it is needed in the cloud. The enSense family includes microclimate, noise, road temperature, traffic volume/speed, flood warning, parking management and a variety of gas sensors for measuring air quality and gas build up.

The enSense Ozone Sensor measures relative levels of ozone in the air and can signal a rise or fall in gas levels in real time. This can be used to assess the average peak level over an hour and the average 24 hour level as defined by the World Health Organisation. As air pollution levels are measured as a combination of NO2 and ozone, it is required to also deploy an NO2 sensor in the same location.

All sensors in the enSense range come in a standard 32mm cylindrical package for easy mounting within an enLight HID lantern, or they can be mounted on the lamp post itself using a bracket. The current set of sensors are wired into the enLight enTalk™ network by connecting to either the enLight entelli-Ballast™ for HID lamps or the enLight enLink™ LED adapter in a loop-in/loop-out configuration.

Ozone Sensor features:

  • Relative measurement of ozone at a resolution of 10ppb
  • Auto-correction for temperature and humidity
  • Mountable at height away from interference
  • Takes power from enLight Lantern or adapter
  • Deployable in a lantern or on a bracket attached to a column
  • No batteries to replace or recharge
  • 2 year guarantee

enSense™ Ozone Sensor Technical Specifications:

  • Environmental protection
    IP68
  • Colour
    Black
  • Temperature range
    -20° to 40°
  • In-Lantern mountable
    Yes
  • Connectivity
    enTalk compatible
  • Bracket mountable
    Yes
  • UV tolerant housing
    Yes
  • Weight
    80g
  • Sensitivity
    10ppb
  • Dimensions
    ∅35mm x H40mm
  • Wired or Wireless
    Wired

Seamless integration with enLight lighting platform

All enSense sensors are designed to enhance the capability of the enLight platform. Many of the sensors can be pre-mounted in any of the enLight lantern family but they can also be connected and mounted below the lantern itself (such as the air quality or microclimate sensors) or in the lamp post to monitor water table level in the base of the column or tamper detection of the access panel. Larger sensors, such as the traffic sensor, can be mounted on the post below the lantern but can derive their power and connectivity from the lantern via a simple cable connection. Away from the lamp post, wireless enSense devices (coming 2017) can connect to the network via the enLight DOLFin® Pro for their data feed to be sent on to the enLight enGauge™ API.

Cost effective smart city deployment

By deploying the enLight platform on lamp posts across the city, town or campus, a whole host of smart applications can be realised by utilising the network created by the augmented lighting. Multiple wireless technologies do not need to be funded and the inherent value of the street light estate increases as it allows resource reduction or increased efficiency projects to be deployed, without the major capital cost of their own networks. The enSense sensors are fully compatible with the enLight enCore™ Management System or via other management platforms through the enLight enGauge API.